|Taxes||Province or State Tax will apply|
E17AWeight: 2290 lbs
See below finance estimate.
*Credit approval criteria includes down payment between 10% and 20% of the purchase price, excluding any applicable dealer charges, sales taxes, title and registration fees.
There are two roof vents in your trailer; the rearward is a static vent which includes a bug screen and a manually opening domed lid. This vent location is also pre-wired for an air conditioner. The forward vent is a MaxxFan, a bi-directional, thermostatically controlled 12V unit. It features a manually opening lid with a built in rain cover and the controls are located on the unit itself.
Front vent is a Maxx Fan
Winterizing T-Valve shuts off the flow of water from the fresh water tank to instead pull from an included tube which can be put into a bottle of antifreeze to winterize your system.
Safety chains act as a backup in the event your trailer decouples from your vehicle. Should this occur, the chains will ‘catch’ the trailer so that you can pull over safely. In the event that your trailer is fully disconnected from your tow vehicle (safety chains do not catch/fail) the ride suspension break-away switch will engage the trailer’s brakes to mitigate the potential for an accident.
Full Size Spare is mounted on the standard steel rim, comes with a Canadian Maple Leaf Cover.
Add custom graphics (limited to characters) to your trailer. Price will be determined based on the number of characters used and anticipates standard font size (std font size references the graphic font/size on the rear or side of the trailer). Any other size, font or colours would require a custom quote – see Custom Decal Graphics Plus. Please keep in mind that if you select the Rear Exterior LED Light option, this may impact the placement of your chosen graphic. It may be off-center or split.
*CHOOSE THE AMOUNT OF LETTERS YOU NEED.
*Please use notes to let us know what your graphics are going to say and where you would like them located on the trailer.
Add custom graphics (limited to characters) to your trailer. Custom price will be determined based on the number of characters, font, font size or colors. Please keep in mind that if you select the optional Rear Exterior LED Light it may impact the placement of your chosen graphic. It may be off center or split.
Remove the decalling on the trailer for a clean, egg-like look. Side decal only.
There are three different choices for the cabinetry. Oak, Maple or Contemporary.
Both the Maple and Contemporary options include frosted acrylic inserts for the upper cabinet doors.
The Oak upper cabinet door inserts are solid wood.
*PLEASE SELECT ONE CABINETRY ONLY
Choose the Formica for your countertops and tabletop from one of our seven standard selections.
The names of the countertops are in sequence with the last image.
*PLEASE SELECT ONE COUNTERTOP ONLY
Select your very own choice of Formica with a matte finish. Some conditions apply and our dedicated configuration specialists will be pleased to assist.
Visit Formica to select a countertop color, texture, and pattern to perfectly match your style.
*PLEASE CHOOSE ONE OPTION ONLY
This will finish the edge of your counters and tables.
*PLEASE SELECT ONE TRIM ONLY
Pick the perfect flooring to complement and tie together the personalization of your trailer. Choose from one of our standard choices or select your own in the Custom Flooring option.
*PLEASE SELECT ONE FLOORING ONLY
We recommend ordering flooring locally to eliminate shipping costs. Select your flooring choice from one of the links below and contact Olson Floors toll-free 1.877.823.0020 or 604-856-5766 to place your order.
*Images are just a sample of available possibilities.
4″ high-density foam cushions are finished with your fabric choice on all sides except the back which is a beige, easily-cleaned, robust vinyl backing.
If you prefer to have a full wrap on your cushions they will be fully wrapped in the fabric you selected and won’t have the vinyl backing.
*Second to last picture shows the standard vinyl back of the cushion. If you would like a Full Wrap please also check “FULL WRAP ON CUSHIONS”
The standard cushions come with a beige vinyl backing. If you select to have a full wrap on your cushions they will be fully wrapped in the fabric of your choice. They will not have the beige vinyl back.
The valances are typically covered in the same material as the cushions however, a second fabric may be used. This could be one of the 7 standard ETI fabrics or a customer provided fabric. 3 yards are typically required.
*CHOOSE ONLY ONE FABRIC
Select your very own choice of fabric. Some conditions apply and our dedicated configuration specialists will be pleased to assist.
The standard cushions come with a beige vinyl backing. If you select the full wrap option, your cushions will be fully wrapped with the custom fabric of your choice.
This option gives you the ability to select a second fabric for your valances, that will compliment the fabric you have selected for your dinette cushions. 3 yds are required.
Upgraded batteries are essential for off-grid camping.
The first battery option is Dual 6V Deep Cycle Lead-Acid Batteries. These batteries store ~225Ah, making these ideal for those who go off-grid for long weekends. For reference, the standard 12V battery stores ~94Ah. One important thing to note is that Lead-Acid batteries can only discharge to half of their available capacity (~112 Usable Ah for Dual 6V Lead-Acid Batteries).
The next battery type is Lithium, of which you can choose up to two. These batteries offer a myriad of improvements over lead-acid: They last 3-5x longer, have a better power-density ratio (lighter), charge faster, and most importantly can discharge to a much lower level. The selection of a lithium battery will add a DC-DC Charger to facilitate proper charging from your batteries. While lithium batteries have their benefits, they are more temperature-sensitive and may not charge under cold temperatures (below freezing).
*CHOOSE ONE OPTION ONLY
Converts battery power (DC/12V) to AC/120V (used in most household appliances) power in outlets. Primarily used when off-grid with no access to 120V Shorepower. Please note: Will not run the Air Conditioner. For that to operate, trailer must be connected to shore power or sufficiently sized generator (2200W minimum).
Includes transfer switch is wired to all interior 120V outlets
Solar panels allow the user to boondock for a much greater amount of time by recharging your batteries throughout the day. The solar panel only charges the batteries, it does not provide power to the internal appliances or plug sockets. Solar Panel comes with charge controller.
The solar port adds a Zamp solar port below the belly band for use with a portable solar unit (commonly called a solar suitcase). Great feature to easily add increased solar capability in the case that your roof mounted solar panels are obscured from sunlight.
NOTE: This option is available when at least one solar roof panel is selected. Your portable solar panel must not include the charge controller. Your solar port will be wired to the roof mounted solar charge controller.
This pre-wire will make it much easier to add solar to your trailer after market, either for your own use or to improve the resale value of the trailer (not required if solar panel option selected).
The EMS and Surge Protector will protect your trailer from ‘bad’ sources of power (reverse polarity, power surges, black outs etc). This option will protect your trailer from the damage these ‘bad’ sources of power could cause.
This option adds a sealed port to the side of the trailer in which the provided 25’-30A Cord plugs into. Power cord can be easily removed/cleaned and can be stored anywhere, rather than the storage space inside the trailer. If the cord breaks it is far easier to replace the cord than splice in a new one.
The Wireless Back-Up Camera allows the user to see directly behind the trailer, which will most typically be used for help with backing into your camping spot. It can also be used to aid in switching lanes since visibility can be effected between the driver and the back of the trailer the back-up camera adds another view.
Display monitor for vehicle wired with 12V plug.
The Dometic 11,000BTU provides cooling during hot temperatures. It includes a white shroud and heat strip that will remove the chill from the air on a frosty morning. Shore power will be required to run this unit or it will also run on a 2200 Watt generator because it is a high-efficiency model.
Add a second Maxx fan to the trailer when an air conditioner is not selected. This 12V 10-Speed MaxxFan can pull/push are in/out of the trailer and can be left open when driving and in the rain.
Max Fan open: height 8 ¾”
Max Fan closed: height 4 ¾”
Difference: height 4″
A spacer set is installed between the axle mounts and the trailer frame to lift the body up by 2-⅝”. Improves ground clearance for use in off-road situations.
Aluminum rims are an attractive alternative to steel. They are strong but light weight and are resistant to rust and corrosion. Includes 3 tires and rims
Available for the E17A and E17B.
The Power Awning Dometic 9500E is a nice, sleek awning that makes setup and teardown as easy as pressing a button on the remote. It includes an adjustable wind sensor that will automatically retract the awning under heavy winds.
Delete the manual awning from your build.
Add a dimmable LED light strip under your awning to provide ambient light. Controlled by a remote.
Replace the standard clear lenses on the Exterior LED Lights with amber lenses. These lenses are less likely to attract bugs due to their warm light they emit.
Provides better visibility for rear traffic. Trailer comes standard with lower rear LED Brake/Signal Lights. Only available for the E17A or E17B. (These lights are standard on all other models.)
Provides an additional source of lighting for the trailer exterior. Installed on the trailer and centered above the belly band.
Includes standard location plus locations 1 & 3 on one switch inside the front door of the trailer.
Adds a 12V outlet and two USB-A Outlets to the exterior of the trailer. These outlets are powered directly from the battery and thus will function when off-the-grid. It will be installed on the Passenger’s Side below the bellyband towards the rear of the trailer
If you would like the ability to have an exterior shower (hot/cold water) propane installed in your 17’A Escape, this option is worth considering.
6 gal. hot water tank heats water for use in the trailer. The Two-Way Hot water tank is fuelled by either Propane or 120V power. Additionally, you can run 120V and Propane concurrently to heat water fast.
1.5″ of spray foam insulation applied on top of everything on the underside of the trailer between the frame (with the dump valves, etc. left uncovered) will improve the shoulder-seasonality of your trailer. Also helps reduce ambient noise.
*CHOOSE ONE OPTION ONLY
Add a full-fiberglass storage box on the tongue of the trailer. This box is lockable on either side with a padlock (not included).
Provides exterior access to specific storage areas within each trailer. Access is typically to space within a dinette bench seat or beneath a bed.
This option is great for those with mobility issues or if you are hitching/unhitching often. The power tongue jack makes jacking up/down as simple as pressing the button and waiting. It also features a light to better see your tongue/hitch as well as a manual crank if the motor fails/there is no power.
Sand pads are 5″ x 5″ metal plates bolted to the foot of the front/rear stabilizer jacks. This increased surface area gives improved stabilization on uneven ground. Comes in a set of 4.
The Number Pad Door lock (which includes a set of keys) will enable you to lock/unlock the trailer without the need to carry keys around. It is a great option for those with more people accessing the trailer than they have keys for.
Change the belly band color from black (standard) to white.
Lower the exterior grab bar to just above the belly band. Helpful if you are shorter or have mobility issues.
Top-hinged awning-style frameless windows add a sleek, modern look to your trailer while also being great for rainy climates. The rear frameless window is a vertically-split opening window and is included as a part of this package.
Window in kitchen for additional ventilation. Frameless window.
Opening window in kitchen for additional light and ventilation.
Switch out the non-opening framed rear window with a top-hinged, awning-style opening frameless rear window. The rear window is the only window that can be mixed and matched.
FRICTION SWAY CONTROL BAR (SINGLE)
This hitch is ideal for customers who do not need weight distribution between tow vehicle and trailer. Typically this is the case if the tow vehicle is heavy. This hitch set up will provide sway control and reduces the risk of sway of your trailer. The friction sway control bar must be removed when backing up the tow vehicle or while making a sharp turn.
Includes: Adapter plate, friction sway control bar, 2″ ball, any size drop mount (hole bar). No credit provided if customers do not need some of the parts such as drop mount.
EQUALIZE HITCH (Pro-Series 600lb Trunnion)
Equalizer hitch without anti sway bars. Distributes weight between trailer and tow vehicle for better traction of front wheels on tow vehicle.
EQUALIZE HITCH W/ SWAY CONTROL BAR (Pro-Series 600lb Trunnion)
Equalizer hitch with one rigid friction sway control bar . The friction sway control bar must be removed when backing up the tow vehicle or while making a sharp turn. Distributes weight between trailer and tow vehicle for better traction of front wheels on tow vehicle. Helps reduce sway of trailer.
E2 BY FASTWAY INTEGRATED SWAY CONTROL & WEIGHT DISTRIBUTION HITCH
This hitch offers faster and easier sway control and weight distribution. With built-in, permanent sway control, you can hitch up, tow, and unhitch with ease. There is nothing extra to connect or store, and nothing to remove when backing or making a tight turn. Equalizer hitch with anti sway bars. Distributes weight between trailer and tow vehicle for better traction of front wheels on tow vehicle. Reduces sway of trailer.
For all hitches except FRICTION SWAY CONTROL BAR (SINGLE) a different drop bar may be required depending on the height of your vehicle. Please see option “DROP BAR”.
*CHOOSE ONE OPTION ONLY
Drop bars adjust the height of the ball height to match your trailer from the height of your tow vehicle.
Not available for the FRICTION SWAY CONTROL BAR (SINGLE).
Start your Escape adventure ASAP with filled propane tanks. Only available to customers picking up from Escape or in Sumas.
Provides non-dimmable spotlight-like illumination which can be adjusted to suit your desired reading position. Please see the configuration guide for available locations.
LED Captain’s reading lights (pack of 4) dinette area in each corner driver’s side and passenger’s side.
Provides non-dimmable spotlight like illumination which can be adjusted to suit your desired reading position.
Has the same features as the standard system, but better. Rather than using probes to measure the level of tanks the SeeLevel II uses a capacitive pad on the outside of each tank to more accurately measure their levels. Further, it features a screen that displays the percentage level of the tanks, making it much more comprehensive. Less maintenance/cleaning required.
A 12V wire will be installed in the rear overhead cabinet. This will facilitate the installation of an aftermarket back-up camera.
Typically installed inside cabinets to make it easier for post production lights etc. to be installed inside those spaces. Escape to define locations.
Add additional 12V/USB outlets to the interior of your trailer. Includes one 12V outlet and 2 USB-A outlets. Please see the configuration guide for available locations.
Add additional 120V outlets to the interior of your trailer. Includes two grounded 120V outlets.
Counter extensions are easily flipped up when needed and down when not. Please refer to the configuration guide for available locations.
*CHOOSE AS MANY COUNTER EXTIONS THAT WORK FOR YOU
Additional counter extensions and hardware – uninstalled. For that do it yourself project.
No custom sizing it must be from our standard list. Please refer to the configuration guide to determine which size counter extension fits which location.
These retractable wall hooks (3 per set) are great for coats, bathrobes, towels, dog leashes etc. Please refer to the configuration guide for available locations.
*CHOOSE ONE OR MORE OPTIONS
Adds 3/4″ plywood between the paneling of your chosen wall, thus making it stronger for wall hooks, TV mounts etc. In most cases, reinforced walls are not necessary for the installation of ETI provided retractable wall hooks, counter extensions or TV arm. Please reference the configuration guide for available reinforced wall locations. Each reinforced wall will add 25lbs of weight.
Add up to two shelves in the wardrobe to increase the utility of the storage space. These will be evenly spaced. If shelves are added the hanging rod will be deleted.
*You can only have 1 Shelf if you choose 2 drawers in E19 / E21’NE
*CHOOSE ONE OR TWO SHELVES
Convert the bench seat to a U-shape dinette. The U-Shape dinette is ideal for a lounge or reading space for two people. Dinette Table will be ~18″ shorter.
Most versatile table in terms of moving table top. Mounted on supporting arm attached to two steel brackets situated underneath dinette (rear bench). Only available with a u-shape dinette.
Increase the depth of ‘u-portion’ of the U-Shape dinette. Both the seat cushions and bench structure are increased from 18″ to 22″. The table length will be decreased by a corresponding 4″.
Modify the standard backrest (2″ with plywood back) to a 4″ cushion (no plywood back). This provides extra comfort due to the improved thickness and the increased space between the front of the cusions and the rear window blinds/knobs.
Vertically split the backrest down the middle for easier access to storage.
Vertically split the backrest down the middle for easier access to storage.
Vertically split the bench cushion to allow for easier removal of rear U-Shape seat cushions. This primarily benefits access to under-seat storage.
This will allow easier access of rear bench seat storage.
Pneumatic table leg makes it exceptionally easy to convert to/from a dinette/bed. To convert the dinette to a bed, simply unlock the levers, push the tabletop down and lock levers. Also includes the standard slider.
This options give you the opportunity to make your U-Shape dinette into a Lounge area. It extends the seating area.
Can be added to Standard Dinette as well.
Leave the table mounting system uninstalled for an aftermarket installation.The standard table and mounting system will be shipped loose inside the trailer.
Delete the door/drawer pulls from your build. The pilot holes will not be drilled and the hardware will not be supplied.
Escape mattresses are custom-ordered with rounded corners to fit the curvature of the trailer walls and are made slightly smaller than the bed area to allow for airflow around the mattress. Please verify that your desired aftermarket mattress will fit before deleting the stock mattress from your build.
3-burner cooktop adds a stylish, modern look to the trailer with an eye-catching design. Does not include a glass cover.
*CANNOT COMBINE OVEN OPTION
Delete the cooktop in the trailer.
(Gas line and 12V for iginition will be installed as normal. These cannot be removed.)
Delete the range hood and exterior vent. Replaces range hood with a dome light.
When adding this option the standard cabinet door will be deleted from your build.
3 way (12V, 120V and propane) 4cuft optional fridge in a 17′ Escape. The standard fridge is a 3cuft 3 way fridge.
Delete the fridge from the trailer. Power and gas lines will be installed.
Stylish looking backsplash for easy cleaning. Installed behind the countertop for maximum longevity.
Rear of countertop only, not side.
This option is great for watching TV and listening to music. The Boss stereo features Bluetooth functionality, offers FM/AM radio alongside a CD/DVD player. It also has an 3.5mm AUX port, a USB-A port, as well as stereo audio ports.
Audio visual cable not included.
When the stereo is selected in the 19′, it is not possible to have the Captains Reading Light in location #3 and when selected in the 17’A or B model, it is not possible to have the Captains Reading light in location #4.
Allows the user to connect campsite coaxial TV ports to their exterior coax port using a coax cable (not included). This port is wired to an internal coax port in the bed area. From there the user can plug their TV (not included) into said port using another coax cable. Selection of this option also includes an additional 120V outlet next to the interior coax port.
Does not include a TV.
This option adds a TV Antenna which enables the user to use their TV setup where hookups are not available. Terrestrial TV signal availability varies based on location.
Cannot be combined with a second solar panel (except on E5.0). Includes TV Ready with 120V Outlet.
*Does not include a TV.
The E17A is an ultra-lightweight trailer that offers a permanent bed, rear dinette and plenty of storage. No bathroom.